Description
Made-to-measure greenery. Up in minutes, and it stays that way.
The Hanging Greenery Kit is a run of click-together modules that attaches to a wall, with lifelike, soft-leaf trailing plants slotted in and a cover plate over the front. The foliage spills over the front, so you have a narrow planter box overflowing with greenery. Put it along a wall, bulkhead, bar front or partition top and the space lifts straight away. Nothing to water, nothing to trim, nothing to wire in.
Great for commercial spaces so whether you've got 1 metre to cover or 60, this is a perfect option.
Same wall. Same afternoon.
Two venues, photographed before the kits went up and again once they were in place.
No painting, no joinery, no trades. One covered rail with its plants, fixed whichever way suits your space.
Before
After
Before
AfterFour steps. No specialist skills.
Click the modules together
The modules push together end to end with a click. Each kit makes its own length, and the lengths sit end to end along your space.
Fix modules to the wall
Fix them along the wall with screws or adhesive, or zip ties around a railing or pipe. Mounting them before the plants go in keeps them light and easy to line up, and the cover plate hides every fixing.
Slot in the plants
Each plant has a central stalk that drops into its module. Turn the thumbscrew and it is held firm.
Click on the cover plates
Click the cover plates onto the front of the modules, then ease the foliage forward over the top edge. The modules disappear behind the green and you are done.
Fix it your way
Every module is designed to mount three ways, so pick whichever suits the surface. The cover plate goes over the front, so no screw head, glue line or tie is ever on show.
Screws
Each module has pre-drilled holes for screws. The most secure choice for walls, bulkheads, timber beams and bar fronts.
Best for: permanent installs
Adhesive
Run a bead of construction adhesive such as Liquid Nails, or a few dabs of super glue, along the flat back of each module and press into place.
Best for: no-drill surfaces
Zip ties
Loop a zip tie around the module and the beam, pipe or rafter and pull tight. Fully removable, so it suits rentals, events and covered outdoor areas.
Best for: beams and temporary runsMade to fit your specific measurements.
Enter the length of your space at the top of this page and we fabricate the kit to fit, whether it is a 2.4 metre bar front or a 5.2 metre bulkhead. Since every kit carries a mixed set of plants, a long run looks ultra natural, not like a repeated block.
Everything you need to put it up.
- Your length, as 1-metre kits. Every order arrives as self-contained 1-metre kits, plus a shorter kit to make up your length. A 4 m run, for example, is four 1-metre kits; 4.4 m is four kits plus a 0.4 m kit. The kits sit end to end along your space, and nothing longer than a metre ever needs lifting in one piece.
- Click-together mounting modules to suit your length, each with a clamp thumbscrew fitted, in a warm brown finish that sits quietly behind the foliage.
- Cover plates to suit your length, in a warm brown finish. They fit over the front of the modules and hide the modules, the thumbscrews and every fixing.
- Soft-leaf trailing plants from a mix of Devil's Ivy, Staghorn Ferns, Leaf Garlands and Peperoni Bush, chosen so the run looks full and natural from any angle. The exact mix varies slightly from order to order.
- Three ways to mount built into every module: pre-drilled screw holes, a flat back for adhesive, and a shape that zip ties loop around cleanly.
- A finish that holds. Lifelike soft-touch foliage on wire stems that keeps its shape and colour with no care beyond an occasional dust.
After a particular look? Get in touch and we will put together a plant mix to suit your space.
Above bars, banquettes and reception counters across Australia.
The same rail system runs through hotels, clubs, cafés and offices. It suits any long area that needs softening: the top of a partition, the front of a bulkhead, the line above a bar or the underside of a mezzanine.
Talk to us about a commercial quote.
Runs over 20 metres, or fitting out a whole venue, office or retail space? Send us the lengths you want to cover and we will quote the kits, suggest a plant mix that suits the space, and price the job as a whole. For select projects we can also arrange installation, so the greenery goes up without your team lifting a finger.
Set it up once. Forget about it.
No care needed
No watering, no light, no trimming and no seasonal drop. A light dust now and then keeps it looking fresh.
Indoor by design
Made for indoor spaces. For covered outdoor areas, a coat of UV protection spray will help the colour last.
Easy to refresh
Take off the cover plates, loosen the thumbscrews and each plant lifts straight out, so the mix can be changed later without taking the modules down.
One measurement. That is the whole plan.
Measure the length, enter it, and add to cart. Everything arrives ready to click together.
Questions about this kit
Is there any assembly?
Yes, and it is quick. Click the modules together, fix the rail to the wall with screws, adhesive or zip ties, drop each plant's stalk into its module and turn the thumbscrew, then fit the cover plates over the front. Putting the kit together needs no tools. Less than a minute per plant.
How do I measure my space?
Run a tape along the wall, bulkhead or bar front where you want the greenery, from one end to the other, and enter that number at the top of the page. Any length from 0.75m to 20m can be ordered online. Allow around 50cm to 1m of drop below the rail for the foliage.
Will I see the modules?
Very little. The module sits behind a warm brown cover plate and the plants spill over the front of it, so what shows is a thin brown line through the foliage that looks like a thin planter box. No clamps, screws or thumbscrews are on show.
Will a long order come as one long rail?
No. Every order comes as 1-metre kits, plus a shorter kit to make up your length, so a 4 m run is four 1-metre kits. Each kit clicks into its own run and the runs sit end to end along your space, which keeps every piece light and easy to handle.
I have several separate planter boxes or sections. Do I order one length or several?
Several. Each box or section needs its own run, so measure each one and add it to the cart as its own length. One run made to the total of all your sections will not fit across the dividers.
My space is longer than 20 metres. What then?
Send us the lengths and we will quote the job as a whole. For select projects we can also arrange installation. Request a commercial quote.
Can I change the length after ordering?
Contact us as soon as possible with your order number. Once your kits have been made to your measurements they cannot be altered, so please measure carefully before you order.
Can I return it if I change my mind?
Because every kit is made to your measurements, we cannot accept change-of-mind returns on this product. Faulty or damaged items are always covered: get in touch and we will put it right.
